PEX features a three-dimensional molecular bond created within the structure of the plastic , either before or after the extrusion process.Through chemical/ Physical reactions , manufacturers structurally modify the polyethylene chains , significantly improving performance on properties like heat deformation , and chemical , abrasion , and stress crack resistance. The resulting pipe has greater impact and tensile strengths , improved creep resistance , decreased shrinkage , and performs extremely well at high temperatures and pressures.

 

 

 

Main material：100% Virgin LG188 / Lotte 8100GX

Production standard ： ISO15875-2:2003

Package : DN 16-32 100m/ 200m / 300m per roll

DN 16-50 3m / 4m / 6m per length

Roll length can be customized according to requirements.

 

CODE	S SERIES	SIZE
HDXA001	S5	16×1.8
HDXA002	S5	20×1.9
HDXA003	S5	20×2.0
HDXA004	S5	25×2.3
HDXA005	S5	32×2.9
HDXA006	S5	40×3.7
HDXA007	S5	50×3.6
HDXA008	S4	16×2.0
HDXA009	S4	20×2.3
HDXA010	S4	25×2.8
HDXA011	S4	32×3.6
HDXA012	S3.2	16×2.2
HDXA013	S3.2	20×2.8
HDXA 014	S3.2	25×3.5
HDXA015	S3.2	32×4.4

 

 

 

Density	0.951	g/cm³
Thermal conductivity	0.4	W/mâ–ªK
VICAT Softening temperature	130-132	℃
Maximum temperature of function	110	℃
Coefficient of linear thermal expansion	0.15	Mm/m°K

 

 

 

Easy to install and economical , PEX piping provides consistent , uniform heat , It is easy to see why radiant heating system will likely gain popularity in the years to come , Eliminating forced air to heat a space can help do away with a lot of unhealthy dust and allergens , Home builders during the Roman Empire knew what they were doing.

 

 

Heating basements , garages , shops , greenhouses , farms , home additions and more .Any barn , service building , residential home , or commercial facility where labor occurs will be better if the floors are warm.

 

 

 

 

Suitable for all type of hot and cold water installations , PEX pipe is a great solution for any kind of plumbing system in both new builds and renovations. Hard -wearing and flexible , PEX pipe is also easy to install.

 

 

Cross-link polyethylene , or PEx , pipe has become increasingly popular in plumbing systems over the years both in hot and cold water installations , In fact , PEX pipe is gradually replacing copper pipe as it is quicker to install , does not require soldering , is more flexible and can be sealed behind a wall.

PEX pipe can be used to supply hot and cold water to feed central heating radiators or underfloor heating systems . Extremely versatile , PEX pipe can be used for new installations , to extend existing pipe systems or to replace older pipe entirely , provided you choose the right type of pipe and pipe fittings . Affordable and easy to install , PEX pipe is an accessible and often more efficient alternative to copper pipe.

 

 

Pex Crimp fittings can be used to connect PEX pipe to any type of fixture . These fittings are the only type of PEX fittings that can be installed in a wall or behind a partition wall . The connection is made by compressing a crimp ring over the PEX pipe . The connection is made by compressing a crimp ring over the PEX pipe using a special PEX Crimping tool. Like expansion fittings , these fittings are absolutely watertight but are permanent meaning they cannot be removed once fitted.

 

PEX compression fittings can be used to connect PEX piping or to connect PEX pipe to other types of pipe like copper . These fittings are compressed by tightening a compression nut or ring around a compression insert using an open ended spanner or adjustable spanner . They are quick to fit . These fittings can be used for cold or hot water systems and tend to be the most straightforward of all PEX fittings to install.

 

PEX expansion fittings are used to connect pipe to fixtures . They are easy and quick to assemble provided you have a special tool to briefly stretch the pipe . These fittings feature a male connection which is inserted into the expanded PEX pipe . The connection is secured by sliding a clamp ring over the male connection to trap the pipe between the two components .Much more reliable than compression fittings, the only downside of expansion fittings is that they cannot be disconnected once in place.

 

http://www.hdpexpipe.com/