HiOSO Technology Co.,Ltd is one of the leading 1fe + 2fx node type media converter manufacturers, equipped with productive factory, welcome to buy and wholesale 1fe 100m + 2 fiber 100m node type media converter, 1rj45 100m + 2 sc 100m node type media converter, 1fe + 2fx cascaded media converter products from us.
Overview
HiOSO FC650E is a kind of 10/100Mbps adaptive fast Ethernet node type fiber media converter, with 1 10/100Mbps adaptive switch, which can implement mutual conversion between 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. FC650F can extend the transmission distance of a network from 100m over copper wires to 120Km. This type of fiber converter supports two different types of network connection media types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, this kind of converter supports transmission in dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode fibers.
Features
Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrade;
Efficient built-in switching core, to implement flow control and reduce broadcast packets;
Provide electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units;
Support full-duplex and half duplex transmission modes and capable of automatic negotiation;
Support automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
Support the transmission of extra-long packets (with the maximum length of 1552 bytes);
Support Quality of Service (QoS) and ensuring transmission of VoIP packets;
Support Spanning Tree Protocol (STP) to form a redundant network;
Low power consumption, low heat and capable of stable operation for a long period of time;
Support multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application
10/100Mbps fast Ethernet long-distance transmission network
Technical Specifications
Parameter |
Specifications |
Access mode |
10/100Mbps |
Standard |
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree |
Wavelength |
850nm/1310nm/1550nm |
Transmission distance |
Dual-fiber multi-mode: 2Km; |
Port |
1 RJ45 connector, connected to STP/UTP category-5 twisted pair |
Conversion mode |
Medium conversion, storing and forwarding mode |
MAC address table |
I K |
Buffer space |
1Mbit |
Flow control |
Full duplex state: flow control; half duplex state: back pressure mode |
Delay |
9.6us |
Bit error rate |
<1/1000000000 |
MTBF |
100,000 hours |
LED |
POWER (power), FX LINK/ACT (fiber connection/action) |
Power |
DC5V/1A (external) |
Power consumption |
3.5W |
Operating temperature |
-10~55℃ |
Operating humidity |
5%~90% |
Storage temperature |
-40~70℃ |
Storage humidity |
5%~90% (non-condensing) |
Dimensions |
26mm(Height)*70mm(Width)*98mm(Depth) (external power) |
Order Information
Model |
Rate |
Mode |
Working Wavelength |
Transmission Distance |
Fiber |
Power |
FC650EM2-SC/ST |
10/100 |
Dual-fiber multi-mode |
1310 |
2 |
SC/ST |
External DC5V/1A |
FC650ES20/40/60 -SC/FC |
10/100 |
Dual-fiber single-mode |
1310 |
25/40/60 |
SC/FC |
External DC5V/1A |
FC650ES80/100/120-SC/FC |
10/100 |
Dual-fiber single-mode |
1550 |
80/100/120 |
SC/FC |
External DC5V/1A |
FC650FS-S20/40/60-SC |
10/100 |
Single-fiber single-mode |
1310/1550 |
25/40/60 |
SC |
External DC5V/1A |
FC650ES-S80/100-SC |
10/100 |
Single-fiber single-mode |
1310/1550 |
80/100 |
SC |
External DC5V/1A |