HiOSO Technology Co.,Ltd is one of the leading 1ge managed media converter manufacturers, equipped with productive factory, welcome to buy and wholesale gigabit managed media converter, 1rj45 1000m managed media converter products from us.
Overview
HiOSO FC830AGM Series belongs to 10/100/1000M auto-adapted Ethernet Fiber Media Converter (Or called Photo-electrical Conversion) with management function, which supports SNMP Protocol, remote Telnet management, Com port management and software upgrade. It can supervise the working condition and configure the mode of each local media converter in the slot and remote media converter connected to the other side.
10/100/1000M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX, 1000Base-T, 1000Base-X and IEEE 802.3x International Standard etc. It can completely be cooperated with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also provide cost-efficient hardware support to the information transmission of Broadband private network and Fiber Optical citywide LAN.
Feature
Supports SNMP management, Web address management and Telnet management
Enable/Disable optical link-loss alarm function
Four transmission modes are selectable
Comply with IEEE 802.3μ 100BASE TX, IEEE802.3 10BASE-T standard and 1000Base-T/FX
Comply with IEEE 802.1Q VLAN protocol
Support 10/100/1000M, Full/Half duplex auto-negotiation
Support MDI/MDIX auto sense
Support transmission distance of up to 120km (Dual-fiber)
Support over-size packets of up to 10240 Byte
Support hot-swappable
The cards work as standalone and rack-based Media Converters
Single-fiber and dual-fiber devices are available
Technical Data
- Mechanical Parameters -
|
Size |
32mm(H)x 165mm(W)x 128mm(D) |
|
Operating temperature |
﹣10～﹢55℃ |
|
Storage temperature |
﹣40～﹢70℃ |
|
Power supply |
AC220V / DC﹣48V |
-Optical Parameters -
|
Multimode Fiber: 62.5/125, 50/125, 100/140μm |
|
|
MM2km orMM5km |
Output power: -20～﹣18dBm |
|
Receiving sensitivity: <﹣31dbm< p=""> |
|
|
Distance: 0～2km or 0～5km |
|
|
Connector: SC(standard)／FC(optional) /ST(optional) |
|
|
Type: dual-fiber |
|
|
Wavelength: 850nm/1310nm |
|
|
Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm |
|
|
25km |
Distance: 0～25km |
|
Output power:-15～﹣8dBm （dual-fiber）,-14～﹣8dBm （single-fiber） |
|
|
Receiving sensitivity: <﹣34dBm（dual-fiber）, <﹣33dbm（single-fiber）< p=""> |
|
|
Connector: SC(standard)／FC(optional) /ST(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber), 1310nm(dual-fiber) |
|
|
40km |
Distance: 0～40km |
|
Output power: -10～﹣5dBm （dual-fiber）,-9～﹣5dBm （single-fiber） |
|
|
Receiving sensitivity: < ﹣36dBm（dual-fiber）,<-33dbm（single-fiber）< p=""> |
|
|
Connector: SC(standard)／FC(optional) /ST(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber), 1310nm(dual-fiber) |
|
|
60km |
Distance: 0～60km (when less than 15km, use attenuator) |
|
Output power:﹣5～0dBm（dual-fiber）,-6～0dbm（single-fiber） |
|
|
Receiving sensitivity: < ﹣36dBm |
|
|
Connector: SC(standard)／FC(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber), 1310nm(dual-fiber) |
|
|
80km |
Distance: 0～80km (when less than 15km, use attenuator) |
|
Output power:﹣8～-2dBm（dual-fiber）,-3～3dbm（single-fiber） |
|
|
Receiving sensitivity: < ﹣36dBm |
|
|
Connector: SC(standard)／FC(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber), 1550nm(dual-fiber) |
|
|
100km |
Distance: 0～100km (when less than 15km, use attenuator) |
|
Output power:﹣6～-1dBm |
|
|
Receiving sensitivity: < ﹣38dBm |
|
|
Connector: SC(standard)／FC(optional) |
|
|
Type: single-fiber / dual-fiber |
|
|
Wavelength: 1310nm/1550nm(single-fiber), 1550nm(dual-fiber) |
|
|
120km |
Distance: 0～120km (when less than 15km, use attenuator) |
|
Output power:﹣5～0dBm |
|
|
Receiving sensitivity: < ﹣38dBm |
|
|
Connector: SC(standard)／FC(optional) |
|
|
Type: dual-fiber |
|
|
Wavelength: 1550nm |
|
Order Information
|
Model |
Rate |
Mode |
Working Wavelength (nm) |
Distance (Km) |
Fiber Interface |
Power |
|
FC830AGM-M2-SC/ST |
10/100 |
Dual-fiber multi-mode |
1310 |
2 |
SC/ST |
External DC5V/1A |
|
FC830AGMP-M2-SC/ST |
10/100 |
Dual-fiber multi-mode |
1310 |
2 |
SC/ST |
Built-in AC220V/ DC-48V |
|
FC830AGMC-M2-SC/ST |
10/100 |
Dual-fiber multi-mode |
1310 |
2 |
SC/ST |
Module card: DC5V |
|
FC830AGM-S20/40/60- SC/FC |
10/100 |
Dual-fiber single-mode |
1310 |
25/40/60 |
SC/FC |
External DC5V/1A |
|
FC830AGM- S80/100/120-SC/FC |
10/100 |
Dual-fiber single-mode |
1550 |
80/100/120 |
SC/FC |
External DC5V/1A |
|
FC830AGMP-S20/40/60- SC/FC |
10/100 |
Dual-fiber single-mode |
1310 |
25/40/60 |
SC/FC |
Built-in AC220V/ DC-48V |
|
FC830AGMP- S80/100/120-SC/FC |
10/100 |
Dual-fiber single-mode |
1550 |
80/100/120 |
SC/FC |
Built-in AC220V/ DC-48V |
|
FC830AGMC- S20/40/60-SC/FC |
10/100 |
Dual-fiber single-mode |
1310 |
25/40/60 |
SC/FC |
Module card DC5V |
|
FC830AGMC- S80/100/120-SC/FC |
10/100 |
Dual-fiber single-mode |
1550 |
80/100/120 |
SC/FC |
Module card DC5V |
|
FC830AGMS- S20/40/60/80/100-SC |
10/100 |
Single-fiber single-mode |
WDM 1310/1550 |
25/40/60/80/100 |
SC |
External DC5V/1A |
|
FC830AGMPS- S20/40/60/80/100-SC |
10/100 |
Single-fiber single-mode |
WDM 1310/1550 |
25/40/60/80/100 |
SC |
Built-in AC220V/ DC-48V |
|
FC830AGMCS- S20/40/60/80/100-SC |
10/100 |
Single-fiber single-mode |
WDM 1310/1550 |
25/40/60/80/100 |
SC |
Module card DC5V |